Milliput is a two-part, cold setting, non-shrinking epoxy putty sold in packs containing 113.4gm (2 x 56·7g) sticks
Six grades of Milliput are available:
Standard Yellow/Grey
Silver Grey
Superfine White
Terracotta
Black
Turquoise Blue
Milliput can be used for a wide range of repairs and wood & woodturning decorations eg rims of wooden bowls, wood turned clocks & ring inlays.
The 2 sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature.
Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process).
Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
We recommend Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for around 2 years.
